LOGO
SF6 Decomposition Product Tester
SF6 Decomposition Product Tester 缩略图1

SF6 Decomposition Product Tester

The CFJ-4 SF6 gas decomposition product tester integrates SO₂, H₂S, CO, and HF detection capabilities into a single device – combining functions that previously required four separate instruments into one unit. With a single on-site measurement, users can simultaneously monitor two key parameters, significantly reducing gas consumption by up to two-thirds per measurement cycle, while also decreasing the user's workload and enhancing operational efficiency. Fast energy-saving mode: After powering on and entering measurement mode, the measurement duration is approximately 5 minutes. Self-locking joint: Features original German-imported self-locking joints – safe, reliable, and leak-proof. Data storage: Features a high-capacity design capable of storing up to 250 sets of test data. Clear display: A 4.3-inch HD touchscreen that directly displays measurement data such as SO₂, H₂S, CO, HF, as well as the time and date. Built-in power source: A built-in 4 Ah rechargeable lithium-ion battery; one full charge provides up to 10 hours of continuous operation. On-device calibration: This device features a built-in calibration function that allows for data calibration without the need to connect it to a computer.

1.Connect the threaded end of the measurement pipeline to the switch connector and tighten it with a wrench; then close the needle valve at the other end of the measurement pipeline. Next, insert one end of the quick-connect fitting on the test pipeline into the sampling port on the tester; connect the exhaust pipeline to the exhaust port; finally, connect the switch connector to the SF6 electrical equipment's measurement interface and tighten it with a wrench.

2. Turn on the instrument's power switch; the instrument will then enter the initialization self-calibration process.

3. Check power supply: This instrument is recommended to be operated primarily using alternating current (AC).

When using DC power, please check the battery level displayed in the top-right corner. If the battery level is below approximately 30%, turn off the device, charge it, and then continue using it.

4. After completing the initialization self-calibration, the measuring instrument automatically enters the measurement mode (pressing the "Return" key switches you back to the main menu; pressing any function icon on the menu opens the corresponding interface). At this point, open the flow valve on the front panel of the tester, then adjust the flow rate to 0.2 LPM by manipulating the needle valve on the measurement pipeline.

5. After completing the data measurement, you can save the data in the instrument; press the "OK" button to access the operation menu – for detailed instructions, please refer to the section below.

6. After completing the measurement, close the needle valve on the measurement pipeline and the adjustment valve on the testing instrument.

Remove the adapter from the SF6 electrical equipment. If you need to perform measurements on other equipment, do not turn off the instrument's power; proceed with the next measurement according to the steps outlined above.

7. After completing the measurement, turn off the tester's power supply.


Phone Consultation
0756-8581231 | 13652202967

Service Commitment

Pre-Sales Consultation

Product inquiries, technical issues, professionals are always ready to answer your questions. Global unified transparent pricing, on-site visits, we welcome customer visits at any time and provide professional product technical solutions.

In-Sales Commitment

We sign agreements and fulfill contract contents using the national unified standard "Industrial Product Sales Contract". If there are any issues, we will actively communicate with you in the first time, track the logistics status throughout the process, and ensure the product arrives safely and quickly at the destination.

After-Sales Support

Within 12 months from the date of shipment, under normal customer storage, maintenance, and usage conditions, if the product cannot be used normally due to manufacturing quality issues, we provide "three guarantees" service. According to customer needs or agreements, we provide spare parts, installation, commissioning, and maintenance services in a timely manner, as well as technical training for relevant customer personnel.

Recommended for you